session IP
- Title
Interactive Presentations - IAF MATERIALS AND STRUCTURES SYMPOSIUM
- type
interactive
- Description
This session offers a unique opportunity to deliver your key messages in an interactive presentation on any of the subjects of Materials and Structures addressed in the classic Sessions. The presentation will be displayed on a digital screen in a dedicated location and available for view by all Congress attendees for the entire Congress week. In addition, one afternoon is dedicated exclusively for the attendees to view the Interactive Presentations, and the author will be assigned a specific ten minute slot to personally present the topic and interact with the attendees present. The Interactive Presentation may take advantage of all electronic display capabilities, such as: PowerPoint charts, embedded hot links, pictures, audio and video clips etc. An award will also be presented to the author of the best Interactive Presentation in the C Category at a special ceremony. An Abstract that follows the standard format must be submitted by the deadline for standard IAC abstracts.
- Room
- IPC members
Co-Chair: Dr. Jochen Albus, ArianeGroup, Germany;
Co-Chair: Mr. Alwin Eisenmann, IABG Industrieanlagen - Betriebsgesellschaft mbH, Germany;
Paper title | Mode | Presentation status | Speaker | Affiliation | Country |
---|---|---|---|---|---|
Thin Polymer coating on Smart Optical Material, Aluminum-doped Zinc Oxide | 10 | confirmed | Mr. John Patrick Harris | Norfolk State University | United States |
Structural Health Monitoring of Composite Materials using Coupled Nano devices and Acoustic Emission | 10 | Prof. Mostefa Bourchak | King Abdulaziz University | Saudi Arabia | |
10 | withdrawn | Mr. harsh dubey | University of Petroleum and Energy Studies | India | |
Non-explosive actuators with shape memory polymer composites for aerospace | 10 | withdrawn | Prof. Loredana Santo | University of Rome Tor Vergata | Italy |
10 | confirmed | Dr. Jeong-Yeol Han | Korea Astronomy and Space Science Institute/University of Science and Technology | Korea, Republic of | |
Investigating the Influence of a Multiple Launch Rocket System Dynamics on Rocket Range | 10 | confirmed | Mr. Hossam Eisa | Egypt | |
Using pyrotechnic devices in the development of separation systems for rocket and space technologies | 10 | confirmed | Mr. Anatolii Lohvynenko | Yuzhnoye State Design Office | Ukraine |
10 | confirmed | Prof. Ranajay Ghosh | University of Central Florida (UCF) | United States | |
10 | confirmed | Mr. Shipeng Kang | Aerospace System Engineering Shanghai, China | China | |
Evaluating the feasibility of using a variable-length polymer suborbital ultra-light launch vehicle | 10 | confirmed | Dr. Aleksandr Golubek | Oles Honchar Dnipropetrovsk National University | Ukraine |
CFD investigation and optimization on the external aerodynamics of a sounding rocket | 10 | confirmed | Mr. Massimo Della Monica | Sapienza University of Rome | Italy |
Investigating Carbon Fiber Reinforced Polymer Composites for Enhanced CubeSat Structural Design | 10 | confirmed | Mr. Yaqoob Alqassab | National Space Science Agency (NSSA) | Bahrain |
10 | confirmed | Dr. Hee-Kwang Eun | Korea Aerospace Research Institute (KARI) | Korea, Republic of | |
Ground impact testing and monitoring research on the reusable rocket landing cushioning system | 10 | withdrawn | Dr. Dongliang Wang | Institute of Aerospace System Engineering Shanghai | China |
Evaluating Reduced-Order Methods for hypersonic vehicle aerodynamics | 10 | confirmed | Ms. Federica Portis | Politecnico di Torino | Italy |
Static Structural Test and Analysis of Aluminum Skin Stringer Panels at Increased Rivet Spacing | 10 | confirmed | Dr. Hae Won Jang | Korea Aerospace Research Institute (KARI) | Korea, Republic of |
Vibration Analysis and Testing of the Fin Canister of a Hypersonic Rocket | 10 | confirmed | Mr. Vladislav Yushkevich | Concordia University | Canada |
Thermal and Vibrational Analysis of Peruvian 3U CubeSat CHASQUI II for Low-Earth Orbit Missions | 10 | confirmed | Mr. Jhon Gonzales Silvera | Universidad Nacional de Ingeniería (Lima, Perù) | Peru |
A PLANETARY GEAR MECHANISM FOR A COMPETITION ROCKET SEPARATION SYSTEM | 10 | confirmed | Mr. Ricardo Calle | Pontifical Catholic University of Peru | Peru |
In House Design and Analysis of a 6U CubeSat Structural Frame | 10 | confirmed | Mr. Abdulrahman Sulaiman | Sharjah Academy for Astronomy, Space Sciences and Technology (SAASST) | United Arab Emirates |
Passive Thermal Control System Design and Temperature Analysis of Thai Space Consortium-1 Satellite | 10 | confirmed | Mr. Chinphat Patanathabutr | National Astronomical Research Institute of Thailand (NARIT) | Thailand |
10 | confirmed | Dr. Francesca Di Carolo | Politecnico di Bari | Italy | |
10 | withdrawn | Mrs. Fatima Alketbi | Sharjah Academy for Astronomy, Space Sciences and Technology (SAASST) | United Arab Emirates | |
10 | confirmed | Ms. Abigail González-Alcázar | Universidad de Costa Rica | Costa Rica | |
Nonlinear thermo-elastic analysis of laminated composite structures for spacecraft | 10 | confirmed | Ms. Francesca Bracaglia | Politecnico di Torino | Italy |
10 | withdrawn | Mr. Kai Staats | University of Arizona | United States | |
10 | withdrawn | Mr. Di Jin | Beijing Institute of Spacecraft System Engineering, China Academy of Space Technology (CAST) | China | |
Design and development of Of Core Thermal Shroud Structure for ISRO’s LVM3-X mission and beyond | 10 | confirmed | Mrs. Rachel SKD | Indian Space Research Organization (ISRO) | India |
10 | confirmed | Mrs. Rachel SKD | Indian Space Research Organization (ISRO) | India | |
subsystems of a rover framed within the human exploration rover challenge 2022 hosted by nasa | 10 | confirmed | Mr. Alejandro Riaño | Space Generation Advisory Council (SGAC) | Colombia |
A review of sulfur sources for making in-situ sulfur concrete on Mars | 10 | confirmed | Mr. MohammadMahdi Karbalaee | Tarbiat Modares University | Iran |
10 | confirmed | Dr. Iryna Husarova | Yuzhnoye State Design Office | Ukraine | |
10 | confirmed | Mr. Peng Chen | Tongji University | China | |
thermal design and analysis of robotic arm payload of satellite | 10 | confirmed | Mr. Han-Seop Shin | Gyeongsang National University | Korea, Republic of |
10 | confirmed | Dr. Andrea Cambiaghi | CENTROTECNICA | Italy | |
10 | confirmed | Mr. Elliott Ruzicka | United States | ||
10 | confirmed | Mr. Abdullah Algharrash | Space Generation Advisory Council (SGAC) | Saudi Arabia | |
10 | confirmed | Dr. Jun Jiang | Shanghai Engineering Center for Microsatellites, Chinese Academy of Sciences (CAS) | China | |
10 | confirmed | Dr. Stefano Mungiguerra | Università degli Studi di Napoli “Federico II” | Italy | |
Sustainable Extraterrestrial Tool Making Using In Situ Resourcing | 10 | confirmed | Mr. Guadalupe Espinoza Gastelum | International Institute for astronautical Sciences (IIAS) | United States |
Study of the influence of contact model parameters on a berthing operation | 10 | confirmed | Mr. Davide Sorli | Politecnico di Torino | Italy |
Structural Design, Simulation, and Testing of the BIRDS-X Project’s Satellite Dragonfly | 10 | confirmed | Mr. Jorge Rubén Casir Ricaño | Kyushu Institute of Technology | Japan |
Stress Analysis on Deployment of CFRP Bistable Boom under the Environment on the Moon | 10 | confirmed | Mr. Yuta Sunaga | Department of Engineering, The University of Tokyo | Japan |
Spacecraft Materials Analysis in LEO and VLEO Orbits under Atomic Oxygen Interaction | 10 | confirmed | Mr. Salvatore Rea | Scuola Superiore Meridionale | Italy |
10 | withdrawn | Mr. Davide Demartini | ISAE-Supaero University of Toulouse | France | |
Self-healing Materials for Spacecraft Structural Integrity Enhancement | 10 | confirmed | Mr. Zain Ahmad | Space Generation Advisory Council (SGAC) | Pakistan |
10 | withdrawn | Ms. Abhistha Singh | SRM Institute of Science and Technology | India | |
10 | confirmed | Dr. chafika belamri | Algeria | ||
10 | withdrawn | Mr. Joshua Hernández-Ramírez | Instituto Politécnico Nacional | Mexico | |
Protection performance of wedge-shaped corrugated sheets for MMOD shielding of spacecrafts. | 10 | confirmed | Mr. Sushir Subramani | ISAE - Institut Supérieur de l'Aéronautique et de l'Espace | France |
10 | confirmed | Mr. Gustavo Enrique Albarran Gonzalez | Universidad La Salle | Mexico | |
Polyimide-based materials with self-healing properties for lunar exploration missions | 10 | confirmed | Ms. Francesca Blondelli | Sapienza University of Rome | Italy |
10 | confirmed | Mr. Abraham de Jesús Pablo-Sotelo | Instituto Politécnico Nacional | Mexico | |
Numerical transient model for thermomechanical fatigue investigation in metamaterials | 10 | confirmed | Mr. Tommaso Sironi | Politecnico di Bari | Italy |
10 | confirmed | Dr. Junjie Sun | Beihang University (BUAA) | China | |
10 | Dr. Ivan Yakovenko | Joint Institute for High Temperatures of the Russian Academy of Sciences | Russian Federation | ||
10 | confirmed | Mr. Yael E. Castrejón-Ocampo | Instituto Politécnico Nacional | Mexico | |
Monitoring of fin flutter in a composite material based on natural fibers. | 10 | confirmed | Mr. Leonardo Bruno Ramirez Regino | Instituto Politécnico Nacional | Mexico |
Modular Androgynous Standard Interface: A versatile solution for On-Orbit Servicing | 10 | confirmed | Dr. Giuseppe Ventura | CISAS – “G. Colombo” Center of Studies and Activities for Space, University of Padova | Italy |
Modal Testing and Dynamic Simulation Verification Techniques for Shock Test. | 10 | confirmed | Mr. YEN TING LIU | Taiwan Space Agency (TASA) | Taipei |
methods of protecting spacecraft and astronauts from radiation | 10 | confirmed | Ms. Melek Baghirova | National Aviation Academy - Azerbaijan | Azerbaijan |
10 | confirmed | Dr. Furkan Ozdemir | Ankara Yıldırım Beyazıt University | Türkiye | |
10 | confirmed | Dr. Guido Saccone | CIRA Italian Aerospace Research Center, Capua | Italy | |
Investigating Ni-Ti and Aerogel Composite based Whipple Shield for Space Debris Protection | 10 | confirmed | Mr. Pranjal Mhatre | Space Generation Advisory Council (SGAC) | India |
Internal charging and discharging test of Solar Array Drive Mechanism | 10 | Mrs. Kemo Zhang | China Aerospace Science and Technology Corporation (CASC) | China | |
Innovative Geosynchronous orbit assembly of a refuelling station by a robotic arm | 10 | Mr. Romuald Duret | ISAE-Supaero University of Toulouse | France | |
In-Situ Regolith and Metal Fuel Reactions for Lunar and Martian Additive Manufacturing | 10 | confirmed | Mr. Connor MacRobbie | University of Waterloo | Canada |
10 | confirmed | Mr. Premysl Janik | European Space Agency (ESA-ESTEC) | The Netherlands | |
10 | confirmed | Mr. Kwangwoo Kim | School of Aerospace and Mechanical Engineering Korea Aerospace University | Korea, Republic of | |
10 | confirmed | Ms. Ariana Rossell Tapia Salas | Instituto Politécnico Nacional | Mexico | |
10 | confirmed | Mr. Spencer Dansereau | University of Colorado Boulder | United States | |
10 | withdrawn | Mr. Qingfeng Jia | University of Chinese Academy of Sciences; Technology and Engineering Center for Space Utilization, Chinese Academy of Sciences | China | |
10 | confirmed | Ms. Flavia Palmeri | Sapienza University of Rome | Italy | |
Evaluation of Material Degradation in C/SiC Composite Subjected to Reentry Conditions | 10 | confirmed | Mr. Marco Riva | Politecnico di Milano | Italy |
enhancing thermal model accuracy for 2u cubesats: insights from multi-software validation | 10 | confirmed | Ms. Merisa Kosiyakul | Kyushu Institute of Technology | Japan |
10 | Mr. SIDDARTH KIRAN GOLE | R V College of Engineering, Bengaluru | India | ||
10 | confirmed | Mr. Dominik Pridoehl | RWTH Aachen University | Germany | |
Dynamic modeling and simulation of a large angular velocity tumbling flexible propellant spacecraft | 10 | confirmed | Mr. Fuxiang Dong | China Academy of Space Technology (CAST) | China |
10 | confirmed | Mr. Seong Jae Choi | Korea Aerospace Research Institute (KARI) | Korea, Republic of | |
10 | confirmed | Dr. Leonardo Barilaro | Malta | ||
Detailed thermal stresses and free-edge effects analysis of SSPS antenna panel | 10 | confirmed | Ms. Rebecca Masia | Politecnico di Torino | Italy |
Designing and prototyping wheels for space mobility through Generative Design | 10 | withdrawn | Ms. Kirti Rath | University of Victoria | Canada |
10 | confirmed | Mr. Roberto Isaac Ortiz Lazarte | Universidad Nacional de Ingenieria, Peru | Peru | |
design and simulation of a dipole antenna deployment mechanism for 1u to 6u cubesat applications | 10 | confirmed | Mr. Chinathip Narongphun | Kyushu Institute of Technology | Japan |
Design and Prototyping of a Smart Propellant Tank for Spacecraft | 10 | confirmed | Mr. Ahmed E. S. NOSSEIR | University of Trento, Department of Physics, National PhD in Space Science and Technology | Italy |
Design and experimental validation of a novel SMA-actuated variable preload system for space spindle | 10 | withdrawn | Dr. Yuhang Zhang | Beihang University | China |
10 | confirmed | Mr. Juan Efrén Carranco González | Instituto Politécnico Nacional | Mexico | |
10 | confirmed | Mr. Chen haipeng | China Academy of Launch Vehicle Technology (CALT) | China | |
design and development of primary structure for a 3u student satellite | 10 | confirmed | Mr. Surya Vaibhav DVR | BMS College of Engineering, Bengaluru | India |
10 | confirmed | Mr. Andrea Troise | Politecnico di Bari | Italy | |
Design and Develop Advanced Robotic Contour Crafting Process | 10 | confirmed | Dr. SANDhYA RAO | India | |
Configuration effects on isolation performance of Stewart platform based microvibration isolator | 10 | withdrawn | Mr. Bawoul Chung | Korea Advanced Institute of Science and Technology (KAIST) | Korea, Republic of |
10 | confirmed | Mr. Julian Cardenas | Concordia University | Canada | |
characterization and simulation of advanced coatings for space applications | 10 | confirmed | Mr. Riccardo Mantoan | ATLA srl | Italy |
10 | confirmed | Mr. Shouya Yamashita | The University of TOKYO, Graduate school | Japan | |
Bio-inspired Recovery Systems: Learning from Nature to Improve Spacecraft Retrieval | 10 | Mr. SIDDARTH KIRAN GOLE | R V College of Engineering, Bengaluru | India | |
Behavior Analysis of Free Space Capture for Inter-Spacecraft Material Transfer | 10 | confirmed | Mr. Yuto Nakagawa | The University of TOKYO, Graduate school | Japan |
10 | confirmed | Ms. Monica Sofia Mojica Páramo | Instituto Politécnico Nacional | Mexico | |
Assessment of the manufacturing feasibility of the flexible TPS by filament winding | 10 | confirmed | Dr. Artem Andrianov | University of Brasilia | Brazil |
10 | confirmed | Mr. Seung Chan Lee | Korea Advanced Institute of Science and Technology (KAIST) | Korea, Republic of | |
ai-based predicting large deployable structure thermal deformation on-orbit | 10 | confirmed | Mr. Henghui Zhou | Nanjing University of Aeronautics and Astronautics | China |
10 | confirmed | Mr. Mateusz Lentner | Delft Aerospace Rocket Engineering (DARE) | The Netherlands | |
Advancing Experimental Rocketry: FDM-Enabled Ceramic Nozzles for Low-budget Experimental Propellants | 10 | confirmed | Mr. Diego Pérez Reyes | Instituto Tecnológico Autónomo de México | Mexico |
10 | confirmed | Ms. Urszula Wiśniewska | Wroclaw University of Science and Technology | Poland | |
10 | withdrawn | Mr. YASHWANTH R | R V College of Engineering, Bengaluru | India | |
advancements and prospects: self-healing materials in future space exploration | 10 | confirmed | Mr. Leonardo Leyva | Instituto Politécnico Nacional | Mexico |
Adhesion capture dynamics of of space docking mechanism based on bionic adhesion functional surface | 10 | confirmed | Dr. Dongwu Li | Northwestern Polytechnical University | China |
10 | confirmed | Ms. Ariana Rossell Tapia Salas | Instituto Politécnico Nacional | Mexico | |
10 | withdrawn | Mr. Chaitnya Chopra | TU Berlin | Germany | |
A Universal Kinematic Modelling Method for Multi-arms Space Robot with Variable Topology | 10 | confirmed | Mr. Hongxu Wang | Harbin Institute of Technology | China |
10 | confirmed | Mr. Andrea Zanin | Research Consortium Hypatia | Italy | |
Flexural and interlaminar shear strength with EMI shielding performance of CF/CNTF hybrid composite | 10 | confirmed | Ms. MIJOUNG JOUNG | Yonsei University | Korea, Republic of |
10 | confirmed | Dr. Tanya Scalia | Italian Space Agency (ASI) | Italy | |
10 | confirmed | Ms. Tiziana Biasutti | Politecnico di Milano | Italy | |
10 | confirmed | Dr. Franco Maria Di Russo | Sapienza University of Rome | Italy | |
10 | confirmed | Ms. Palvi Garg | Embry-Riddle Aeronautical University | United States | |
Investigation of ultra-lightweight and autonomous deployment systems for solar sails | 10 | confirmed | Mr. Julius Karlapp | Technische Universität Dresden (DTU) | Germany |
Mass-Efficient Temperature Stabilization Device Design for NanoSat System and its Implementation | 10 | confirmed | Dr. Kikuko Miyata | Meijo University | Japan |
10 | confirmed | Dr. You gwang KIM | Korea Aerospace Research Institute (KARI) | Korea, Republic of |