session IP
- Title
Interactive Presentations - IAF MATERIALS AND STRUCTURES SYMPOSIUM
- type
interactive
- Description
This session offers a unique opportunity to deliver your key messages in an interactive presentation on any of the subjects of Materials and Structures addressed in the classic Sessions. The presentation will be displayed on a digital screen in a dedicated location and available for view by all Congress attendees for the entire Congress week. In addition, one afternoon is dedicated exclusively for the attendees to view the Interactive Presentations, and the author will be assigned a specific ten minute slot to personally present the topic and interact with the attendees present. The Interactive Presentation may take advantage of all electronic display capabilities, such as: PowerPoint charts, embedded hot links, pictures, audio and video clips etc. An award will also be presented to the author of the best Interactive Presentation in the C Category at a special ceremony. An Abstract that follows the standard format must be submitted by the deadline for standard IAC abstracts.
- Room
- IPC members
Co-Chair: Dr. Jochen Albus, ArianeGroup, Germany;
Co-Chair: Mr. Alwin Eisenmann, IABG Industrieanlagen - Betriebsgesellschaft mbH, Germany;
Paper title | Mode | Presentation status | Speaker | Affiliation | Country |
|---|---|---|---|---|---|
Ms. Afreena J S | BMS College of Engineering, Bengaluru | India | |||
Dr. Quentin Michalski | School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University | Australia | |||
A Correlation Study of a Satellite Structure Using the Finite Element Method | Mr. Po-Yuan Tung | Taiwan Space Agency (TASA) | Taipei | ||
Mrs. LIU MIN | China Academy of Space Technology (CAST) | China | |||
Designing Efficient Separation Systems for Multilayer Targets in Space Technology | Mr. Oleksandr Minai | Yuzhnoye State Design Office | Ukraine | ||
Design and testing of a dual-mode actuation mechanism for rocket recovery system | Ms. Eliza Łapińska | Warsaw University of Technology (WUT) | Poland | ||
Parachute canopy stress measurements using a flexible screen-printed strain gauge array | Ms. Malwina Bielecka | Warsaw University of Technology (WUT) | Poland | ||
confirmed | Dr. Lei Qu | Beihang University (BUAA) | China | ||
Biomimetic Aerodynamic Enhancements and AI Integration for Rocket Vehicle Performance | Dr. Alejandro Hernandez Gonzalez | Technische Universität München | Mexico | ||
Mr. Sriram Kumar | University of Southern California | United States | |||
THERMAL DESIGN AND ANALYSIS OF ROBOTIC ARM PAYLOAD OF ON-ORBIT SERVICING SATELLITE | Mr. Han-Seop Shin | Gyeongsang National University | Korea, Republic of | ||
Development of Cosmic Ray Shielding Technologies for Spacecraft in Long-Duration Missions | Ms. AMINA RAMDANE | Dr Yahya Fares University | Algeria | ||
confirmed | Ms. Cristina Staffieri | Politecnico di Bari | Italy | ||
Mr. Harshal Kuldeep Kulshrestha | University of Padova - DII | Italy | |||
Mr. Victor Raul Huaman Simeon | Peru | ||||
Mr. Jorge Miguel Adame Martínez | Instituto Politécnico Nacional | Mexico | |||
Dr. Furkan Ozdemir | Ankara Yıldırım Beyazıt University | Türkiye | |||
Design, Simulation, and Testing of a Supersonic Wind Tunnel for Aerodynamic Characterization | Mrs. Natalie Jimena Roldán Cruz | Universidad Nacional Autónoma de México (UNAM) | Mexico | ||
Revolutionizing Space Structures with 4D Printing Technology | confirmed | Ms. Mehlika Zeynep BİLGİN | Türkiye | ||
Comparative Study of Space versus Ground Semiconductor Production | Mr. Deepanshu Mathur | Deep Space Initiative | India | ||
Detection of Material Life in Spacecraft Using an AI-Supported Ground Control Station | confirmed | Mr. Muhammed Mustafa KARAKAŞ | Türkiye | ||
Evaluation of simulation methods for fracture detection in rocket fuselages using computer vision. | Ms. Angélica Gutiérrez Sánchez | Instituto Politécnico Nacional | Mexico | ||
Ms. Savri Gandhi | Georgia Institute of Technology | United States | |||
Effectiveness of aerodisk in alleviating aerodynamic heating during entry to Titan’s atmosphere | Dr. Rajesh Yadav | G D Goenka University | India | ||
Dynamic Stall Suppression on NACA 2412 using spanwise groove in Martian Flight. | Dr. Rajesh Yadav | G D Goenka University | India | ||
From Launch to Landing: Fluidic morphing materials in spacecraft adaptation | confirmed | Ms. Maysam Aladwan | United Arab Emirates | ||
Lightweight and High-Strength AlCoCrFeNi High-Entropy Alloy for Next-Generation Space Launch Systems | Ms. Gopika Sankar | Amity University, Dubai | United Arab Emirates | ||
Dr. Xiaoyuan Wang | Beihang University (BUAA) | China | |||
A NOVEL FLAME-RETARDANT COMPOSITE MATERIAL FOR THERMAL PROTECTION SYSTEMS IN SPACECRAFTS | Ms. Shravani Tembare | BRACT's, Vishwakarma Institute of Information Technology | India | ||
Mr. Sriram Kumar | University of Southern California | United States | |||
Ms. Shravani Tembare | BRACT's, Vishwakarma Institute of Information Technology | India | |||
Mr. Sarkhan Huseynov | ADA University | Azerbaijan | |||
Mr. Riccardo Mazzotti | Adaptronics s.r.l. | Italy | |||
Aerogel-PCM Hybrid Materials for Protecting Space Electronics from Extreme Temperatures | Mr. Elmar Asgarzade | Baku Higher Oil School | Azerbaijan | ||
Ms. Daamini Visaalaakshi | Georgia Institute of Technology | United States | |||
Mr. Abdulkerim Sahin | Istanbul Technical University | Türkiye | |||
Al-G Composite material for increasing thermal stability of deep space exploration mission | Mr. Anand Nagesh | Global Academy of Technology Hostel | India | ||
Analytical behaviour of Regolith-Resin-Composite (RRC) Material for Lunar Construction | Dr. Tafsir Tafsirojjaman | The University of Adelaide | Australia | ||
Application of Dampers to Microsatellites Without Consuming Mass and Volume Resources | Mr. Kentaro Shirai | Tokyo Metropolitan University | Japan | ||
Ms. Victoria de León | TECNOLOGICO DE MONTERREY | Mexico | |||
Bio-Inspired Surface Textures for Aerothermal Load Reduction in Space Re-Entry | Mr. Gyanam Hazarika | India | |||
Challenges and Future Prospects of Innovative Materials and Technologies in Spacecraft Development | Ms. Khanim Azimova | National Aviation Academy - Azerbaijan | Azerbaijan | ||
Ms. Simran Dhoju | Planet | United States | |||
Deployable Thermally Conductive Structure for a Large Active Phased Array Antenna in CubeSats | Mr. Delburg Mitchao | Tokyo Institute of Technology | Japan | ||
design and analysis of a lightweight differential-bar-based system for a four-wheel rover | Mr. Damiano Carra | Politecnico di Torino | Italy | ||
Mr. Jaeseung Heo | Korea Advanced Institute of Science and Technology (KAIST) | Korea, Republic of | |||
Design and Dynamic Analysis of a Mechanically Deployable Aeroshell for Mars Entry | confirmed | Mr. ZIJIE CHEN | Politecnico di Milano | Italy | |
Mr. Davide Sorli | Politecnico di Torino | Italy | |||
Mr. Victor Soh | National University of Singapore | Singapore, Republic of | |||
development of a radiation shielding analysis tool for small satellites | Ms. Johanna Erna Charlotte Teuchert | Technische Universität Berlin | Germany | ||
confirmed | Ms. Adriana Barrios Garcia | Universidad de Antioquia | Colombia | ||
Enabling Sustainable Serving of GEO Satellites through an Inflatable Robotic Manipulator | Dr. Pierpaolo Palmieri | Politecnico di Torino | Italy | ||
Mr. Aayush Thapa | UNSW Australia | Australia | |||
Evaluating the Surface Quality and Optical Performance of Additively Manufactured Mirrors | Ms. Cheryl Chan | University of South Australia | Australia | ||
Experiments on Molten Regolith Extrusion (MREx) Under Vacuum Conditions | confirmed | Mr. Simon Stapperfend | TU Berlin | Germany | |
Dr. Enrico Zappino | Politecnico di Torino | Italy | |||
Guardians of Space: Innovative Approaches to Spacecraft Protection and Environmental Adaptation | Ms. Raneem Alazzam | Jordan University of Science & Technology | Jordan | ||
HYBRID COATINGS AN OPTION AS A PASSIVE THERMAL CONTROL SYSTEM | Mrs. Bryanda Reyes | Universidad Nacional Autónoma de México (UNAM) | Mexico | ||
Hybrid Manufacturing for Lunar Metal Casting: Additive Manufacturing of Regolith Ceramic Molds | Mr. Maxim Isachenkov | Politecnico di Milano | Italy | ||
Mr. Maxim Isachenkov | Politecnico di Milano | Italy | |||
Ms. Maria Moreno | Central University of Venezuela (UCV) | Venezuela | |||
innovative design and testing of 3D-printed aerospike nozzle for sounding rocket applications | Mr. Paweł Wiatrzyk | Delft University of Technology (TU Delft) | The Netherlands | ||
Integrated Robotic System for Space Debris Handling and Satellite Servicing | Mr. Simone Ricciardelli | Politecnico di Torino | Italy | ||
Mr. Omar Blas | Universidad Nacional de Ingeniería (Lima, Perù) | Peru | |||
Lunar-based Manufacturing and Construction: A Comprehensive Review | Mr. MOHAMMAD AZAMI | Concordia University | Canada | ||
Mr. Praveen Elavazhagan | Cranfield University, Cranfiel UK | United Kingdom | |||
Mr. Andrea Troise | Politecnico di Bari | Italy | |||
Multi-Planetary Bio-Architecture – Harnessing Living Systems for Future Space Megastructures. | Ms. Meghna Devi | India | |||
OPTIMIZING SPACECRAFT ELECTRONICS: OVERCOMING PCB THERMAL MODELING CHALLENGES | Ms. Prapty Majumder Golpa | BRAC University | Bangladesh | ||
Origami-Tensegrity Structures for Planetary Surface Protection and Adaptive Deployment | Ms. Leire Roma Rubi | University of California, Berkeley | United States | ||
Photonic Crystal Based Thermal Control Systems for Sustainable Satellite Missions | Dr. Hang Yu | Shanghai Institute of Satellite Engineering | China | ||
Polymerization and Foam Expansion in Microgravity for In-Orbit Servicing Applications | Ms. Léonie Gasteiner | ISAE-Supaero University of Toulouse | Switzerland | ||
Potential Applications of Polypyrrole Nanocomposite Materials in Space Radiation Shielding | Ms. Ulduz Alakbarova | Azerbaijan State University of Economics | Azerbaijan | ||
Ms. Rumeysa Bağlan | Yildiz Technical University | Türkiye | |||
reduction of actuation torque in compliant pivots through a novel negative stiffness mechanism | Mr. Alessandro Battegazzore | Delft University of Technology (TU Delft) | The Netherlands | ||
Mr. Marc Heemskerk | Tallinn University of Technology | Estonia | |||
Self-assembly modular robot for in-space structure construction | Mr. Yajie Cheng | Beijing Institude of technology | China | ||
Mr. Anar Hamdullayev | Baku Engineering University | Azerbaijan | |||
Mr. Ahmed E. S. NOSSEIR | University of Trento, Department of Physics, National PhD in Space Science and Technology | Italy | |||
Ms. Tanaya Katke | India | ||||
Ms. M. Laura Sorgi Johann | Embry-Riddle Aeronautical University | United States | |||
Mr. Ashraf Khater | National Space Science Agency (NSSA) | Bahrain | |||
Structural modeling and optimization of the PeakSat optical communications satellite | Mr. Theodoros Balsis | Aristotle University of Thessaloniki | Greece | ||
Study on S-ALE Method of Pyrotechnic Separation Simulation Test | Ms. Peiying Li | Beijing Institute of Technology | China | ||
studying the interactions of atmospheric plasma-Ssrayed bond coats with rexsixox compositions | withdrawn | Mr. Yunus TOKAÇ | Türkiye | ||
studying the interactions of bond coat system on c-c composites with rexsixox coating compositions | Mr. Yunus TOKAÇ | Türkiye | |||
Tensegrity-Based Heat Shields for Spacecraft Reentry Systems | Ms. Leire Roma Rubi | University of California, Berkeley | United States | ||
Ms. Lucero Lidia Ventura Cruz | Universidad Nacional Mayor de San Marcos | Peru | |||
Ms. Raphaela Guenther | Technische Universität Dresden (DTU) | Germany | |||
XGS Space Waste Recycling Station: A sustainable resource Manufacturing in Orbit | Dr. Gülseren SAKARYA | Ministry of Industry and Technology of Türkiye | Türkiye | ||
a numerical comparative analysis of auxetic inspired landing legs in reusable launch vehicles | 3 | confirmed | Mr. Victor Adeleke | Obafemi Awolowo University | Nigeria |
Self-Healing Materials for Spacecraft and Planetary Habitats: Enhancing Durability and Longevity | 3 | Ms. Dasuni Hewawasam | Space Generation Advisory Council (SGAC) | Sri Lanka | |
An integrated approach to the study of the dynamics of the movement of descent vehicles | 3 | Dr. Vsevolod Koryanov | Bauman Moscow State Technical University | Russian Federation |